CPE 135A
Mainly used as the impact resistant modifier of PVC.
Category:
PVC ADDITIVES
Tel:
Tel:
Email:
Email:
CPE 135A
Details
CPE 135A performance
Mainly used as the impact resistant modifier of PVC. widely added into the products including PVC plate, sheet, calcium-plastic box, case of household appliances and electrical appliance fittings to improve the mechanical property and electrical property. which greatly improve the low temperature resistant impact property and increase flame resistance, oil and aging resistance, corrosion resistance and insulatibity. This can make the plastic product have high filling property and reduce production cost.
|
brand |
performance |
application |
|
CPE135A |
Good softness, low temperature toughness , high intensity, the high filling ability and good resistance performance |
used for Windows and doors profiles, plastic pipes and pipe fittings, plank hard PVC products |
|
CPE |
135A |
135B |
|
Chlorine content |
36±1% |
35±1% |
|
Thermal decomposition temperature |
165℃ |
165℃ |
|
Volatilize |
≤0.3% |
≤0.3% |
|
Residue crystallinity |
≤0.5% |
≤0.5% |
|
Elongation rate |
700% |
700% |
|
Tensile strength |
6.5mkg |
6.5mkg |
|
Apparent density |
0.52g/ml |
0.52g/ml |
|
-renowned hardness |
57 |
|
|
White degree |
85 |
75 |
|
30 mesh nets screening rate |
98% |
98% |
|
Impurities particle number |
≤15 |
≤15 |
Packing and Storage :
PP bags with PE film inside, Net Weight of 25 ± 0.2kg per bag ; For the viscoelasticity and absorbency of CPE resin are strong, this product shall be stored in the dry and ventilated warehouse with stack height no more than 10 bags and avoid solarization, damp and takes strict precautions again stress. It is not dangerous cargo.
Our company mainly CPE resin 135A , The key technical index as follows :
|
|
First quality |
Qualified quality |
|
Content of chlorine % |
33~37 |
33~37 |
|
Crystallization residual% |
≤20 |
---- |
|
Volatilization % |
≤0.4 |
≤0.5 |
|
Residue onsieve % |
≤1.0 |
≤2.0 |
|
Foreign particle/(25*60m2) |
≤100 |
---- |
|
Thermal decomposition temperature ℃ |
≥165 |
≥165 |
|
Apparent density g/ ml |
---- |
---- |
|
Shore hardness (A) |
≤65 |
≤75 |
|
Tensile strength Mpa |
≥6 |
≥6 |
Pre
none
Next
Related Products
Messages